Know what every line costs. Protect what it powers.
Meter each department, machine line or tenant in your industrial park, see live demand and monthly costs side by side, and analyse power quality on the incomer. Add the PSNA-6 to trip circuits on dangerous voltage.
Sound familiar?
One bill, no breakdown
The TNB bill tells you the total, not which department or machine line is driving it.
Voltage damage
A single over- or under-voltage event can take out expensive equipment.
Manual sub-meter readings
Spreadsheets of monthly readings are slow, error-prone and always out of date.
How it works
- 01
Meter the sub-boards
CT-operated three-phase meters on each department or line; a power analyser on the incomer.
- 02
Live data to the cloud
Demand, energy and power factor stream to the dashboard over 4G.
- 03
Allocate costs
Group meters by department, line or tenant and see the cost of each.
- 04
Protect circuits
With the PSNA-6, circuits trip on over-voltage, under-voltage or leakage before equipment is damaged.
Recommended meters
SplinergySW D3P-4G-CT
Three-Phase DIN-Rail Smart Meter (4G, External CT)
Acrel ADW300W-4GHW
Three-Phase IoT Power Analyser with 100 A CT (4G)
Splinergy PSNA-6
Modular Smart Breaker System
4G meters need a data plan: M2M SIM plans from RM 35 per year, SIM card free.
In the field
Estimate your cost
List prices. Excludes installation. Optional online payments: 5% per tenant top-up. Large sites: contact us for custom pricing.
Get an exact quoteBuilt into the platform
Cost centres
Group meters by department, line or tenant for cost allocation.
Power quality
Harmonics, power factor and full electrical parameters with the Acrel analyser.
Voltage protection
Over- and under-voltage trip thresholds set from the cloud (PSNA-6).
Usage history
Daily and monthly energy for every metering point.
Common questions
Can I use Splinergy just for monitoring, without billing tenants?
Yes. You can use Splinergy purely for monitoring: live voltage, current, power and kWh with usage history, for cost allocation between departments, energy audits or finding waste.
Which meter do I need?
Single-phase meters suit individual rooms, apartments and small shops. Three-phase meters suit shoplots, workshops and sub-mains. Choose DIN-rail models for distribution boards and wall-mounted models for meter boards. Not sure? Send us a photo of your distribution board and we'll recommend one.
What is the difference between a smart meter and the PSNA-6 breaker?
Smart meters measure usage, handle billing and can switch supply on or off. The PSNA-6 modular breaker adds breaker-grade protection on each circuit (residual-current/leakage, over-voltage and under-voltage trip) with thresholds set from the cloud.
Should I choose 4G or Wi-Fi meters?
Choose Wi-Fi if the building has stable Wi-Fi reaching every distribution board: the hardware costs less and there is no data plan. Choose 4G where Wi-Fi is weak or unavailable, such as basements, meter rooms and remote sites.
Who installs the meters?
Meters are installed inside the distribution board. Our team can install them for you, or your own registered electrician or contractor can do it. Tell us about your site and we'll advise on the right setup.
How much does the Splinergy platform cost?
The Splinergy platform is RM 10 per meter per month, on a 12-month contract paid upfront (RM 120 per meter per year). On the PSNA-6, every module counts as one meter, including the gateway. Hardware is a one-time purchase from RM 130, and 4G meters need a data plan from RM 35 per year. For large sites, contact us for custom pricing.
Want a breakdown of your factory's energy?
Send us your single-line diagram or a photo of the main board and we'll propose metering points.