Bill every tenant unit. Without reading a single meter.
Put a smart sub-meter on each unit and let Splinergy take the readings, calculate each tenant's usage and bill them, on prepaid or monthly terms. Overdue? Disconnect remotely from the dashboard.
Sound familiar?
Monthly meter rounds
Someone has to walk the building, photograph every meter and key the readings into a spreadsheet.
Shared-bill disputes
Splitting the building's bill by floor area never matches what each tenant actually used.
Overdue tenants
Without a way to act on unpaid bills, utility debt quietly builds up month after month.
How it works
- 01
A meter per unit
Single-phase or three-phase meters on each unit's board; CT-operated meters for larger units and mains.
- 02
Readings, automatically
Every meter reports straight to the cloud over 4G or Wi-Fi. No meter rounds.
- 03
Bill your way
Prepaid balances or monthly invoices per unit, at the rate you set.
- 04
Act on overdue units
Disconnect a unit remotely when payment is overdue, and switch it back on once settled.
Recommended meters
SplinergySW D1P-4G
Single-Phase DIN-Rail Smart Meter (4G)
SplinergySW D3P-4G
Three-Phase DIN-Rail Smart Meter (4G, Direct)
SplinergySW D3P-4G-CT
Three-Phase DIN-Rail Smart Meter (4G, External CT)
4G meters need a data plan: M2M SIM plans from RM 35 per year, SIM card free.
Estimate your cost
List prices. Excludes installation. Optional online payments: 5% per tenant top-up. Large sites: contact us for custom pricing.
Get an exact quoteBuilt into the platform
Prepaid or monthly
Choose prepaid balances or monthly invoices for each tenant.
Per-unit rates
Set a rate per kWh for each unit in the owner dashboard.
Remote disconnect
Switch any unit off or back on from the dashboard.
Sites & divisions
Group units by building, floor or site and see usage at every level.
Common questions
Does Splinergy replace my TNB meter?
No. Splinergy meters are sub-meters installed after your TNB meter, inside your own distribution boards. You still pay TNB for the building's total usage; Splinergy measures and bills each room, unit or circuit behind it.
Which meter do I need?
Single-phase meters suit individual rooms, apartments and small shops. Three-phase meters suit shoplots, workshops and sub-mains. Choose DIN-rail models for distribution boards and wall-mounted models for meter boards. Not sure? Send us a photo of your distribution board and we'll recommend one.
Can I set my own electricity rate?
Yes. The rate per kWh is set per meter in the platform, so different rooms or units can have different rates.
How do tenants pay, and what are the fees?
With the optional built-in payment gateway, tenants pay by Visa, Mastercard, FPX online banking, DuitNow or e-wallets including Touch 'n Go, GrabPay, ShopeePay, WeChat Pay and Alipay. A 5% payment fee applies to all payment methods and is deducted from each top-up, so a RM 100 top-up adds RM 95 to the tenant's balance. The money goes to the property owner's bank account.
Do I have to use the online payment gateway?
No. The payment gateway is optional. You can collect payment from tenants your own way, top up their meters yourself in the platform, or switch a tenant's power off and on manually. The 5% payment fee only applies to top-ups made through the gateway.
Who installs the meters?
Meters are installed inside the distribution board. Our team can install them for you, or your own registered electrician or contractor can do it. Tell us about your site and we'll advise on the right setup.
How much does the Splinergy platform cost?
The Splinergy platform is RM 10 per meter per month, on a 12-month contract paid upfront (RM 120 per meter per year). On the PSNA-6, every module counts as one meter, including the gateway. Hardware is a one-time purchase from RM 130, and 4G meters need a data plan from RM 35 per year. For large sites, contact us for custom pricing.
Managing a commercial property?
Tell us how many units you have and whether they're single- or three-phase, and we'll size the setup.